KILLING MAX SPRAY / HOW TO USE
BED
BUG.
TARGET 03 / BED BUGHOW DOES IT WORK?
CONTACT STARTS THE ACTION.
RESULTS DEVELOP OVER TIME.
When choosing a bed bug killer, consider both the target and where you will apply it. Killing Max is a ready-to-use insecticide spray effective against 14 pests, including bed bugs. Aim for bed bugs to contact the product on surfaces where they hide and travel. Assessing narrow gaps around the bed together is different from treating one visible spot.
- 01
HIDING PLACES
Identify suitable hard surfaces at bed base edges, frame joints and behind the headboard.
- 02
SURFACE CONTACT
A bed bug is exposed when it contacts a treated hiding or travel surface. Textiles that are touched directly are not targeted.
- 03
THE EFFECT DEVELOPS OVER TIME
Increased activity may be seen initially; this indicates that the product has started to take effect. Pest movement then begins to decrease.
- 24HOURS
PESTS DIE
The pests die within 24 hours.
WHERE SHOULD IT BE APPLIED?
Target hiding places and travel routes together.
- 01
Bed base edges
Hard edges and narrow gaps around the bed base; the sleeping surface is not an application area.
- 02
Bed frame joints
Hard joints, gaps and areas around feet where bed bugs may hide.
- 03
Behind the headboard
Suitable hard surfaces behind the headboard and hiding places where it meets the wall.
- 04
Skirting boards and cracks
Wall–floor junctions and narrow cracks near the bed.
- 05
Behind bedside tables and furniture
Behind bedside tables; where affected, suitable hard surfaces beneath and along the edges of sofas.
Representative bed bug treatment scene. Markers show suitable nearby surfaces; observe actual travel routes and hiding places in your area.
HOW SHOULD IT BE APPLIED?
Surface spraying in an unoccupied indoor area. Ready to use; apply directly.
- 1
SHAKE WELL
Shake well before use. Release the safety lock at the tip of the spray head.
- 2
CHECK THE WHOLE BED AREA
Inspect hiding gaps in the bed base, frame, headboard, skirting boards and nearby furniture. Remove bedding from the application area.
- 3
SPRAY FROM APPROXIMATELY 40 CM
Hold the bottle upright and spray onto the identified hard surfaces and around cracks and gaps from a distance of approximately 40 cm, using the amount specified on the label.
AFTER APPLICATION
Follow both the timing and the drying requirement.
- START
APPLICATION
Application is completed.
- 1HOURS
KEEP THE AREA CLOSED
Keep the relevant area closed for 1 hour.
LET SURFACES DRY
Wait for surfaces to dry. Drying time is not fixed.
- 1HOURS
VENTILATION
Once surfaces are dry, ventilate the area for 1 hour.
RETURN TO THE AREA
Use the area again only after the stated times and drying requirement have been met.
IMPORTANT SAFETY NOTEBecause the product leaves no odour, its presence may be harder to notice. Always ventilate for the stated times after application and follow the label’s safety precautions.
MONITOR RESULTS
Assess treated surfaces and the source of the problem together.
If bed bugs are still appearing
ONE SPOT
MAY NOT COVER
EVERY HIDING PLACE.
- There may be other hiding places in the bed base, headboard, frame or nearby furniture.
- You may still see pests that have not come into contact with treated surfaces.
- The guide states that the product does not affect eggs; monitor any newly hatched bed bugs.
- A severe or widespread problem may not end after one application to one spot.
Assess the bed area and other hiding places in the room together. A severe or continuing problem may require professional assessment. Do not set arbitrary reapplication frequencies; keep use within the label’s instructions.
OFFICIAL INFORMATION
OFFICIAL LABEL AND SAFETY INFORMATION
READ THE LABEL BEFORE USE.
USE BIOCIDES SAFELY.
Bed bug — official label information
- Application area and method
- Unoccupied indoor area, surface spraying
- Dilution ratio
- Ready to use, apply directly
- Application dose
- 0.012 g a.i./m²
- Application amount
- 48 ml
a.i. means active ingredient. The official table lists dose and application amount separately; these values have not been converted into a number of trigger sprays.
Shake well before use. Hold the bottle upright and spray from a distance of 40 cm using the amount and method specified on the label. Keep the area closed for 1 hour; wait for surfaces to dry, then ventilate for 1 hour.
- Keep away from children, food and animal feed.
- Do not inhale vapour or spray particles.
- Do not eat, drink or smoke during preparation or application.
- Follow the instructions for use to avoid risks to human health and the environment.
- Avoid release to the environment. Toxic to bees.
- Do not apply to people or animals.
- Do not apply to sheets, pillows, duvets, clothing or textiles that contact skin directly.
- Do not apply to the seating surface of a sofa or armchair.
Type 18 – Insecticide · General public use
MINISTRY OF HEALTH AUTHORISATION DATE AND NUMBER:04.11.2025 – 2025/220