KILLING MAX SPRAY / HOW TO USE
COCK
ROACH.
Common household cockroach
TARGET 01 / COCKROACHHOW DOES IT WORK?
CONTACT STARTS THE ACTION.
RESULTS DEVELOP OVER TIME.
When choosing a cockroach killer, consider both the target and where you will apply it. Killing Max is a ready-to-use insecticide spray effective against 14 pests, including cockroaches. It starts to act when a cockroach contacts a treated surface. Do not expect immediate knockdown and death at first contact.
- 01
SURFACE CONTACT
When a cockroach comes into contact with a treated surface, the insecticide transfers onto its body.
- 02
CHANGE IN ACTIVITY
Increased activity may be seen initially; this indicates that the product has started to take effect.
- 03
MOVEMENT DECREASES
Pest movement then begins to decrease.
- 24HOURS
PESTS DIE
The pests die within 24 hours.
WHERE SHOULD IT BE APPLIED?
Target hiding places and travel routes rather than spraying large surfaces indiscriminately.
- 01
Skirting boards and junctions
Along skirting boards, wall–floor junctions and cracks.
- 02
Under cupboards and worktops
Cupboard bases, lower gaps, edges and corners.
- 03
Behind appliances
Behind fridges and ovens; around dishwashers.
- 04
Basins and pipe openings
Surfaces under basins and around drains and pipe openings.
- 05
Entry points and travel routes
Door thresholds, cracks and narrow gaps used by the insects.
Representative kitchen scene. Choose treatment areas based on pest routes and hiding places in your own area.
HOW SHOULD IT BE APPLIED?
Apply as a surface spray in an unoccupied indoor area. The product is ready to use and applied directly.
- 1
SHAKE WELL
Shake well before use. Release the safety lock at the tip of the spray head.
- 2
HOLD THE BOTTLE UPRIGHT
Identify the areas where target pests are present and their entry routes.
- 3
SPRAY FROM APPROXIMATELY 40 CM
Apply the specified amount to surfaces where cockroaches travel and at passage points.
AFTER APPLICATION
Follow both the timing and the drying requirement.
- START
APPLICATION
Application is completed.
- 1HOURS
KEEP THE AREA CLOSED
Keep the relevant area closed for 1 hour.
LET SURFACES DRY
Wait for surfaces to dry. Drying time is not fixed.
- 1HOURS
VENTILATION
Once surfaces are dry, ventilate the area for 1 hour.
RETURN TO THE AREA
Use the area again only after the stated times and drying requirement have been met.
IMPORTANT SAFETY NOTEBecause the product leaves no odour, its presence may be harder to notice. Always ventilate for the stated times after application and follow the label’s safety precautions.
MONITOR RESULTS
Consider both the source of the problem and contact with treated surfaces.
AGAINST COCKROACHES
RESIDUAL EFFECT.
During this period, the product continues to kill cockroaches that contact treated surfaces.
Do not wash or wipe treated surfaces. Cleaning the surface ends the residual effect.
New cockroaches may enter from outside. The product continues to act when they contact a treated surface. This applies while residual effect remains on the surface and the surface has not been wiped or washed.
If you still see cockroaches
ASSESS NEW ARRIVALS AND
TREATMENT AREAS
TOGETHER.
- New insects may enter from building voids or other areas.
- The nest may be outside the treated area.
- The treatment may have missed the pests’ actual routes and hiding places.
- Treated surfaces may have been cleaned.
- Treating just one area may be insufficient for a severe infestation.
If the source is outside your home, the relevant areas may need assessment by a professional company. If the problem continues, contact us with details of where you see pests, when you applied the product and whether surfaces have been cleaned.
OFFICIAL INFORMATION
OFFICIAL LABEL AND SAFETY INFORMATION
READ THE LABEL BEFORE USE.
USE BIOCIDES SAFELY.
Cockroach — official label information
- Application area and method
- Unoccupied indoor area, surface spraying
- Dilution ratio
- Ready to use, apply directly
- Application dose
- 0.03 g a.i./m²
- Application amount
- 120 ml
- Application interval
- 2 months
a.i. means active ingredient. The official table lists dose and application amount separately; these values have not been converted into a number of trigger sprays.
Shake well before use. Hold the bottle upright and spray from a distance of 40 cm using the amount and method specified on the label. Keep the area closed for 1 hour; wait for surfaces to dry, then ventilate for 1 hour.
- Keep away from children, food and animal feed.
- Do not inhale vapour or spray particles.
- Do not eat, drink or smoke during preparation or application.
- Follow the instructions for use to avoid risks to human health and the environment.
- Avoid release to the environment. Toxic to bees.
- Do not apply to people or animals.
Type 18 – Insecticide · General public use
MINISTRY OF HEALTH AUTHORISATION DATE AND NUMBER:04.11.2025 – 2025/220