KILLING MAX SPRAY / HOW TO USE
FLEA.
TARGET 04 / FLEAHOW DOES IT WORK?
CONTACT STARTS THE ACTION.
RESULTS DEVELOP OVER TIME.
When choosing a flea killer, consider both the target and where you will apply it. Killing Max is a ready-to-use insecticide spray effective against 14 pests, including fleas. Apply to surrounding surfaces where fleas may be present. It is not used to treat fleas on cats or dogs; environmental treatment and treatment of the animal are separate needs.
- 01
IDENTIFY THE SURROUNDING AREA
Check floor edges, under furniture and around pet beds where fleas may be present.
- 02
SURFACE CONTACT
When a flea comes into contact with a suitable treated surface nearby, the insecticide transfers onto its body. Do not apply to the animal.
- 03
THE EFFECT DEVELOPS OVER TIME
Increased activity may be seen initially; this indicates that the product has started to take effect. Pest movement then begins to decrease.
- 24HOURS
PESTS DIE
The pests die within 24 hours.
WHERE SHOULD IT BE APPLIED?
Target hiding places and travel routes together.
- 01
Around pet beds
Suitable hard surfaces around the bed; do not target the surface the animal lies on.
- 02
Skirting boards and floor edges
Wall–floor junctions and edges where fleas may be present.
- 03
Under sofas and furniture
Suitable surrounding surfaces under sofas, beds and furniture.
- 04
Hard flooring near carpet edges
Hard surfaces around carpet and rug edges; direct-contact textiles are not application areas.
- 05
Thresholds and floor cracks
Around thresholds and floor gaps where fleas may travel.
Representative flea treatment scene. Markers show suitable nearby surfaces; observe actual travel routes and hiding places in your area.
HOW SHOULD IT BE APPLIED?
Surface spraying in an unoccupied indoor area. Ready to use; apply directly.
- 1
SHAKE WELL
Shake well before use. Release the safety lock at the tip of the spray head.
- 2
REMOVE ANIMALS AND THEIR BELONGINGS
Work in an unoccupied area. Keep animals, food and water bowls, toys and direct-contact bedding away from the application area.
- 3
SPRAY FROM APPROXIMATELY 40 CM
Hold the bottle upright and spray onto floor edges and identified hard surrounding surfaces from a distance of approximately 40 cm, using the amount specified on the label.
AFTER APPLICATION
Follow both the timing and the drying requirement.
- START
APPLICATION
Application is completed.
- 1HOURS
KEEP THE AREA CLOSED
Keep the relevant area closed for 1 hour.
LET SURFACES DRY
Wait for surfaces to dry. Drying time is not fixed.
- 1HOURS
VENTILATION
Once surfaces are dry, ventilate the area for 1 hour.
RETURN TO THE AREA
Use the area again only after the stated times and drying requirement have been met.
IMPORTANT SAFETY NOTEBecause the product leaves no odour, its presence may be harder to notice. Always ventilate for the stated times after application and follow the label’s safety precautions.
MONITOR RESULTS
Assess treated surfaces and the source of the problem together.
If the flea problem continues
ENVIRONMENTAL TREATMENT AND
TREATING THE ANIMAL
ARE SEPARATE NEEDS.
- Fleas on the pet may persist; veterinary assessment may be needed.
- Affected areas under furniture or along floor edges may have been left untreated.
- The guide states that the product does not affect eggs; newly appearing fleas should be monitored separately.
- Environmental treatment alone may not be sufficient for a severe problem.
Check separately where fleas are seen, which nearby areas have been treated and whether fleas remain on the pet. Do not use Killing Max instead of veterinary treatment. Reassess the treatment areas if fleas persist in the surroundings.
OFFICIAL INFORMATION
OFFICIAL LABEL AND SAFETY INFORMATION
READ THE LABEL BEFORE USE.
USE BIOCIDES SAFELY.
Flea — official label information
- Application area and method
- Unoccupied indoor area, surface spraying
- Dilution ratio
- Ready to use, apply directly
- Application dose
- 0.012 g a.i./m²
- Application amount
- 48 ml
a.i. means active ingredient. The official table lists dose and application amount separately; these values have not been converted into a number of trigger sprays.
Shake well before use. Hold the bottle upright and spray from a distance of 40 cm using the amount and method specified on the label. Keep the area closed for 1 hour; wait for surfaces to dry, then ventilate for 1 hour.
- Keep away from children, food and animal feed.
- Do not inhale vapour or spray particles.
- Do not eat, drink or smoke during preparation or application.
- Follow the instructions for use to avoid risks to human health and the environment.
- Avoid release to the environment. Toxic to bees.
- Do not apply to people or animals.
- Do not apply to cats, dogs or other animals.
- Do not apply to food or water bowls, toys or the direct-contact surface of a pet bed.
Type 18 – Insecticide · General public use
MINISTRY OF HEALTH AUTHORISATION DATE AND NUMBER:04.11.2025 – 2025/220