KILLING MAX SPRAY / HOW TO USE
MOS
QUITO.
TARGET 05 / MOSQUITOHOW DOES IT WORK?
CONTACT STARTS THE ACTION.
RESULTS DEVELOP OVER TIME.
Killing Max is a ready-to-use insecticide spray effective against 14 pests, including mosquitoes. Apply to surfaces where mosquitoes land and rest. Assess its action through surface contact; do not spray indiscriminately into the middle of a room or into the air.
- 01
FIND LANDING SURFACES
Observe where mosquitoes land around windows, doors and quiet sections of wall.
- 02
SURFACE CONTACT
A mosquito is exposed when it contacts a treated landing or resting surface.
- 03
THE EFFECT DEVELOPS OVER TIME
Increased activity may be seen initially; this indicates that the product has started to take effect. Pest movement then begins to decrease.
- 24HOURS
PESTS DIE
The pests die within 24 hours.
WHERE SHOULD IT BE APPLIED?
Target landing and resting surfaces.
- 01
Window edges
Window frames, sills and surrounding surfaces where mosquitoes land.
- 02
Around doors and balcony doors
Suitable landing surfaces around entry openings.
- 03
Quiet, shaded walls
Sections of wall where mosquitoes are observed resting.
- 04
Wall behind curtains
Suitable wall and edge surfaces behind curtains, not the curtains themselves.
- 05
Wall–ceiling junctions
Upper corners and junctions where mosquitoes land.
Representative mosquito treatment scene. Markers show suitable nearby surfaces; observe actual travel routes and hiding places in your area.
HOW SHOULD IT BE APPLIED?
Surface spraying in an unoccupied indoor area. Ready to use; apply directly.
- 1
SHAKE WELL
Shake well before use. Release the safety lock at the tip of the spray head.
- 2
CHOOSE LANDING AND RESTING POINTS
Identify frequently used landing areas around windows, doors and walls. Observe entry openings and landing surfaces together.
- 3
SPRAY FROM APPROXIMATELY 40 CM
Hold the bottle upright and spray evenly onto mosquito landing surfaces from a distance of approximately 40 cm, using the amount specified on the label.
AFTER APPLICATION
Follow both the timing and the drying requirement.
- START
APPLICATION
Application is completed.
- 1HOURS
KEEP THE AREA CLOSED
Keep the relevant area closed for 1 hour.
LET SURFACES DRY
Wait for surfaces to dry. Drying time is not fixed.
- 1HOURS
VENTILATION
Once surfaces are dry, ventilate the area for 1 hour.
RETURN TO THE AREA
Use the area again only after the stated times and drying requirement have been met.
IMPORTANT SAFETY NOTEBecause the product leaves no odour, its presence may be harder to notice. Always ventilate for the stated times after application and follow the label’s safety precautions.
MONITOR RESULTS
Assess treated surfaces and the source of the problem together.
If you see mosquitoes after application
INSECTICIDE ACTION ON SURFACES
IS NOT A CLAIM
OF REPELLENCY.
- New mosquitoes may enter through open doors or windows.
- Mosquitoes seen in the air may not yet have contacted treated landing surfaces.
- Frequently used resting surfaces may have been left untreated.
- Treated surfaces may have been wiped or washed.
Monitor new arrivals and the surfaces mosquitoes actually land on. Do not judge the results solely by the number flying in the room. The insecticide works through contact with treated surfaces; surface treatment does not prevent mosquitoes from entering.
OFFICIAL INFORMATION
OFFICIAL LABEL AND SAFETY INFORMATION
READ THE LABEL BEFORE USE.
USE BIOCIDES SAFELY.
Mosquito — official label information
- Application area and method
- Unoccupied indoor area, surface spraying
- Dilution ratio
- Ready to use, apply directly
- Application dose
- 0.025 g a.i./m²
- Application amount
- 100 ml
a.i. means active ingredient. The official table lists dose and application amount separately; these values have not been converted into a number of trigger sprays.
Shake well before use. Hold the bottle upright and spray from a distance of 40 cm using the amount and method specified on the label. Keep the area closed for 1 hour; wait for surfaces to dry, then ventilate for 1 hour.
- Keep away from children, food and animal feed.
- Do not inhale vapour or spray particles.
- Do not eat, drink or smoke during preparation or application.
- Follow the instructions for use to avoid risks to human health and the environment.
- Avoid release to the environment. Toxic to bees.
- Do not apply to people or animals.
- Do not spray indiscriminately into the air; apply to landing and resting surfaces.
- Do not apply to skin or clothing as a personal repellent.
Type 18 – Insecticide · General public use
MINISTRY OF HEALTH AUTHORISATION DATE AND NUMBER:04.11.2025 – 2025/220