KILLING MAX SPRAY / HOW TO USE
SAND
FLY.
TARGET 12 / SAND FLYHOW DOES IT WORK?
CONTACT STARTS THE ACTION.
RESULTS DEVELOP OVER TIME.
Killing Max is a ready-to-use insecticide spray effective against 14 pests, including sand flies. Observe entry openings and landing or resting surfaces together. Do not use Killing Max like an aerosol sprayed indiscriminately into the air.
- 01
FIND ENTRY AND RESTING POINTS
Identify landing areas around windows, doors and sheltered walls.
- 02
LANDING SURFACE CONTACT
A sand fly encounters the product when it contacts a suitable treated surface.
- 03
THE EFFECT DEVELOPS OVER TIME
Increased activity may be seen initially; this indicates that the product has started to take effect. Pest movement then begins to decrease.
- 24HOURS
PESTS DIE
The pests die within 24 hours.
WHERE SHOULD IT BE APPLIED?
Target hiding places and travel routes together.
- 01
Around windows and insect screens
Suitable frames and edges where sand flies enter and land.
- 02
Around doors and balconies
Entry openings and nearby landing surfaces on the indoor side.
- 03
Sheltered walls
Quiet, shaded wall sections where resting is observed.
- 04
Wall behind curtains
Target suitable walls and narrow edges behind textiles, not the textiles themselves.
- 05
Wall–ceiling junctions
Upper corners and junctions where the pest is observed landing.
Representative sand fly treatment scene. Markers show suitable nearby surfaces; observe actual travel routes and hiding places in your area.
HOW SHOULD IT BE APPLIED?
Surface spraying in an unoccupied indoor area. Ready to use; apply directly.
- 1
SHAKE WELL
Shake well before use. Release the safety lock at the tip of the spray head.
- 2
CHOOSE LANDING AND ENTRY POINTS TOGETHER
Observe windows, doors and balconies, especially when new sand flies are frequently seen. Identify surfaces they use at insect screen edges and on sheltered walls.
- 3
SPRAY FROM APPROXIMATELY 40 CM
Hold the bottle upright and spray onto suitable sand fly landing surfaces from a distance of approximately 40 cm, using the amount specified on the label.
AFTER APPLICATION
Follow both the timing and the drying requirement.
- START
APPLICATION
Application is completed.
- 1HOURS
KEEP THE AREA CLOSED
Keep the relevant area closed for 1 hour.
LET SURFACES DRY
Wait for surfaces to dry. Drying time is not fixed.
- 1HOURS
VENTILATION
Once surfaces are dry, ventilate the area for 1 hour.
RETURN TO THE AREA
Use the area again only after the stated times and drying requirement have been met.
IMPORTANT SAFETY NOTEBecause the product leaves no odour, its presence may be harder to notice. Always ventilate for the stated times after application and follow the label’s safety precautions.
MONITOR RESULTS
Assess treated surfaces and the source of the problem together.
If sand flies continue to appear
LANDING SURFACE CONTACT
AND NEW ARRIVALS
ARE MONITORED TOGETHER.
- New sand flies may enter through windows or balcony openings.
- A sheltered wall surface used for resting may not have been treated.
- A sand fly seen in the air may not yet have come into contact with a treated surface.
- Treated edges and frames may have been cleaned.
Monitor where and when sand flies continue to enter, along with the surfaces they actually land on. Do not use the product as an air treatment or personal repellent.
OFFICIAL INFORMATION
OFFICIAL LABEL AND SAFETY INFORMATION
READ THE LABEL BEFORE USE.
USE BIOCIDES SAFELY.
Sand fly — official label information
- Application area and method
- Unoccupied indoor area, surface spraying
- Dilution ratio
- Ready to use, apply directly
- Application dose
- 0.025 g a.i./m²
- Application amount
- 100 ml
a.i. means active ingredient. The official table lists dose and application amount separately; these values have not been converted into a number of trigger sprays.
Shake well before use. Hold the bottle upright and spray from a distance of 40 cm using the amount and method specified on the label. Keep the area closed for 1 hour; wait for surfaces to dry, then ventilate for 1 hour.
- Keep away from children, food and animal feed.
- Do not inhale vapour or spray particles.
- Do not eat, drink or smoke during preparation or application.
- Follow the instructions for use to avoid risks to human health and the environment.
- Avoid release to the environment. Toxic to bees.
- Do not apply to people or animals.
- Do not spray indiscriminately into the air.
- Do not apply to skin, clothing or animals as a personal repellent.
Type 18 – Insecticide · General public use
MINISTRY OF HEALTH AUTHORISATION DATE AND NUMBER:04.11.2025 – 2025/220