KILLING MAX SPRAY / HOW TO USE
SILVER
FISH.
Silverfish
TARGET 08 / SILVERFISHHOW DOES IT WORK?
CONTACT STARTS THE ACTION.
RESULTS DEVELOP OVER TIME.
Killing Max is a ready-to-use insecticide spray effective against 14 pests, including silverfish. Find damp, dark hiding places around bathrooms and basins. Target dry edges and sheltered travel surfaces rather than large surfaces that are constantly washed.
- 01
FIND SHELTERED SPOTS
Check under basins, around pipes, behind cupboards and in narrow gaps.
- 02
EDGE SURFACE CONTACT
Silverfish encounter the product as they travel along a treated edge or around a crack.
- 03
THE EFFECT DEVELOPS OVER TIME
Increased activity may be seen initially; this indicates that the product has started to take effect. Pest movement then begins to decrease.
- 24HOURS
PESTS DIE
The pests die within 24 hours.
WHERE SHOULD IT BE APPLIED?
Target hiding places and travel routes together.
- 01
Under basins and around pipe openings
Pipe entries, suitable surrounding surfaces inside cupboards and narrow gaps under basins.
- 02
Cupboard bases
Lower edges and areas around cupboard feet where silverfish travel.
- 03
Dry skirting board edges
Wall–floor junctions that are not constantly washed with water.
- 04
Behind cupboards and belongings
Suitable sheltered surfaces behind bathroom cupboards and appliances.
- 05
Cracks and dark corners
Narrow gaps and dry corners where hiding is observed.
Representative silverfish treatment scene. Markers show suitable nearby surfaces; observe actual travel routes and hiding places in your area.
HOW SHOULD IT BE APPLIED?
Surface spraying in an unoccupied indoor area. Ready to use; apply directly.
- 1
SHAKE WELL
Shake well before use. Release the safety lock at the tip of the spray head.
- 2
CHOOSE DRY EDGES AND HIDING PLACES
Observe where silverfish emerge at night or hide during the day. Check under basins, around pipes and behind cupboards; distinguish these from frequently washed surfaces.
- 3
SPRAY FROM APPROXIMATELY 40 CM
Hold the bottle upright and spray onto selected dry edges, cracks and suitable surrounding surfaces from a distance of approximately 40 cm, using the amount specified on the label.
AFTER APPLICATION
Follow both the timing and the drying requirement.
- START
APPLICATION
Application is completed.
- 1HOURS
KEEP THE AREA CLOSED
Keep the relevant area closed for 1 hour.
LET SURFACES DRY
Wait for surfaces to dry. Drying time is not fixed.
- 1HOURS
VENTILATION
Once surfaces are dry, ventilate the area for 1 hour.
RETURN TO THE AREA
Use the area again only after the stated times and drying requirement have been met.
IMPORTANT SAFETY NOTEBecause the product leaves no odour, its presence may be harder to notice. Always ventilate for the stated times after application and follow the label’s safety precautions.
MONITOR RESULTS
Assess treated surfaces and the source of the problem together.
If silverfish reappear
MONITOR HIDING PLACES AND
WHETHER SURFACES WERE WASHED
TOGETHER.
- Another damp, dark gap may have been left untreated.
- Movement behind cupboards or appliances may be continuing.
- The treated surface may have been washed with water or wiped.
- The silverfish seen may not have come into contact with a treated edge.
Track the time and place of sightings. Assess hiding conditions and surface cleaning together; do not apply other pests’ residual-effect durations to silverfish.
OFFICIAL INFORMATION
OFFICIAL LABEL AND SAFETY INFORMATION
READ THE LABEL BEFORE USE.
USE BIOCIDES SAFELY.
Silverfish — official label information
- Application area and method
- Unoccupied indoor area, surface spraying
- Dilution ratio
- Ready to use, apply directly
- Application dose
- 0.01 g a.i./m²
- Application amount
- 40 ml
a.i. means active ingredient. The official table lists dose and application amount separately; these values have not been converted into a number of trigger sprays.
Shake well before use. Hold the bottle upright and spray from a distance of 40 cm using the amount and method specified on the label. Keep the area closed for 1 hour; wait for surfaces to dry, then ventilate for 1 hour.
- Keep away from children, food and animal feed.
- Do not inhale vapour or spray particles.
- Do not eat, drink or smoke during preparation or application.
- Follow the instructions for use to avoid risks to human health and the environment.
- Avoid release to the environment. Toxic to bees.
- Do not apply to people or animals.
- Do not apply to personal items or surfaces that come into direct contact with skin.
Type 18 – Insecticide · General public use
MINISTRY OF HEALTH AUTHORISATION DATE AND NUMBER:04.11.2025 – 2025/220